CMT: Expanded IMO data collection rule needs engine monitoring rethink
(Posted on 14/01/26)
Shipowners and managers are being reminded to review onboard fuel-measurement and data-capture practices following the entry into force of amendments to MARPOL Annex VI.
All ships of 5,000gt and above engaged on international voyages must now begin collecting more detailed operational data under the IMO Data Collection System. This includes information on how much fuel is used by different onboard systems, alongside information on distances sailed and time underway to allow fuel consumption to be assessed against the work the ship performs.
While the official entry into force date was August 1, 2025, data collection is based on a full calendar year.
“Although information using the enhanced dataset does not have to be submitted until early 2027, the obligation to generate compliant data starts now,” said Uwe Krüger, Joint Managing Director of Germany’s CM Technologies (CMT). “Separating data collection from reporting is essential, as information that is not captured onboard during 2026 cannot be produced later.”
Founded in 2003, CM Technologies GmbH is one of the world's leading providers of testing and monitoring technology. CMT is the recognised expert in machine health monitoring, fuel and lubricant analysis and water testing.
The amendment, adopted at MEPC 81 in March 2024, does not change the established IMO DCS reporting cycle. Fuel-oil consumption data for a given calendar year must still be verified by the Flag State or a recognised organisation, typically a classification society, with a Statement of Compliance issued by 31 May of the following year. What has changed is the scope, structure and traceability of the data that must now exist to support that process.
“Ships are now required to collect more granular information than under the original 2016 framework, moving beyond aggregated fuel figures towards continuous measurement that can demonstrate how fuel is consumed across different onboard systems and operating conditions. For many fleets, this represents a practical shift from estimation and reconciliation towards direct measurement,” said Krüger.
According to CMT, a common source of uncertainty is the assumption that the expanded DCS can be addressed primarily through revised reporting procedures, rather than through changes to how operational data is generated onboard. “It is important for shipowners to understand that expanded IMO DCS separates when data is collected from when it is reported,” said Fuhlbrügge. “The first reports will be submitted in 2027, but the quality of those submissions depends entirely on what is measured and logged onboard throughout 2026, and the quality of that data.”
He added that ensuring the right tools are in place early reduces both compliance risk and verification effort later. “If fuel consumption by consumer and operating data are being generated continuously, owners place themselves in a much stronger position when the data is audited and reviewed.
Latest News
Cavotec signs second major reel contract from Civmec for Port Hedland
(Posted on 14/01/26)Cavotec has signed another contract with Australian construction and engineering company Civmec for... Read more
Samuel Schär is the new CEO of Bühler Group
(Posted on 06/01/26)As announced in April 2025, Samuel Schär has assumed his position as CEO of Bühler, effective... Read more
Smart Ship Hub expects breakthrough year for digitalisation in 2026
(Posted on 23/12/25)Leading vessel performance platform Smart Ship Hub says the industry should expect a breakthrough year... Read more
Accelerating zero-carbon shipping in the Nordics
(Posted on 18/12/25)The Nordic countries are taking an important step towards decarbonising maritime transport with the... Read more
Steelpaint appoints ADD Marine to drive growth in Greece and Cyprus
(Posted on 18/12/25)Germany’s Steelpaint has appointed ADD Marine as its representative for Greece and Cyprus, strengthening... Read more
Rio Tinto’s first Pilbara-made rail car built by Gemco in Karratha
(Posted on 09/12/25)Rio Tinto’s first Pilbara-made iron ore rail car has rolled off the production line in Karratha... Read more
Electric Liebherr portal crane strengthens Baria Serece, Vietnam
(Posted on 04/12/25)Precision meets progress at Phu My Port, Vietnam. The LPS 550 has been deployed to handle bulk commodities... Read more
bound4blue targets Asian growth with new production capabilities
(Posted on 02/12/25)bound4blue, a global leader in wind propulsion systems, has expanded its industrial footprint in Asia... Read more
DNV: Methanol as marine fuel at high readiness level
(Posted on 02/12/25)As the industry explores multiple decarbonisation pathways, methanol is gaining attention as a practical... Read more
Repeat Aasen bulk carrier order emphasises Wärtsilä hybrid strength
(Posted on 24/11/25)Technology group Wärtsilä will supply an integrated hybrid propulsion system for a bulk carrier... Read more
